optional xlt программы

Результаты поиска для «optional xlt»:

FastRecoder DLL v2.41 FastRecoder DLL v2.41 
…  XLT Recoder. – Fast QuotedPrintable Decoder w/i optional xlt Recoder. В XLT Pack входят 5 таблиц перекодировок кодовых страниц CP437, CP866, CP1251, KOI8-R. См. тестовую программу (MSVB6).… 

Mirage IIse » Color Profiles Set (Optional - not required for scanning itself) Mirage IIse » Color Profiles Set (Optional - not required for scanning itself)
… Color Profiles Set (Optional - not required for scanning itself)… 

PowerLook 2100XL » Color Profiles Set (Optional - not required for scanning itself) PowerLook 2100XL » Color Profiles Set (Optional - not required for scanning itself)
… Color Profiles Set (Optional - not required for scanning itself)… 

PowerLook III » Color Profiles Set (Optional - not required for scanning itself) PowerLook III » Color Profiles Set (Optional - not required for scanning itself)
… Color Profiles Set (Optional - not required for scanning itself)… 

DP1250 » Drivers PCL-XL DP1250 » Drivers PCL-XL
… These models can print when the optional PCL board is installed.… 

DP1450 » Drivers PCL-XL DP1450 » Drivers PCL-XL
… These models can print when the optional PCL board is installed.… 

Mirage II » MagicScan 4.5 Mirage II » MagicScan 4.5
… er for w2k installed, turned on and "ready" before boot. WinXP: ask service-agency for detailed instructions, in some cases scanner firmware should be upgraded. At least, new XP-compatible driver for SCSI card should be installed BEFORE reboot WinXP.… 

PowerLook III » MagicScan 4.5 PowerLook III » MagicScan 4.5
… er for w2k installed, turned on and "ready" before boot. WinXP: ask service-agency for detailed instructions, in some cases scanner firmware should be upgraded. At least, new XP-compatible driver for SCSI card should be installed BEFORE reboot WinXP.… 

PowerLook II » MagicScan 4.5 PowerLook II » MagicScan 4.5
… er for w2k installed, turned on and "ready" before boot. WinXP: ask service-agency for detailed instructions, in some cases scanner firmware should be upgraded. At least, new XP-compatible driver for SCSI card should be installed BEFORE reboot WinXP.… 

PowerLook » MagicScan 4.5 PowerLook » MagicScan 4.5
… er for w2k installed, turned on and "ready" before boot. WinXP: ask service-agency for detailed instructions, in some cases scanner firmware should be upgraded. At least, new XP-compatible driver for SCSI card should be installed BEFORE reboot WinXP.… 


Схожее: